220v 1 Phase Servo Speed Motor Drive Controller 1hp Phase Ac Motor
Introduction to product features
Built in motion control function,
Support I/O control and standard Modbus RTU protocol
In some cases, it supports the replacement of PLC or pulse module.
1 The pulse module supports 5V and 24V independent connection, and the built-in 24V power supply effectively reduces signal interference.
2 Support 17 bit single turn absolute vaLue encoder;
3 Equipped with a new generation of servo motor, it can cover the power range of 50w-3000w;
4 Direct control via switch
Minimalist motion control scheme
Ultra low cost design
Cyclic control of point motion
5 Controlled by i/o module of PLC
PLC pulse output module required
Reduce users' system design cost
Simpler control and easy operation
Parameter:
Wiring diagram of position control mode
1. The internal +24v power supply voltage range is 20v~28v, and the maximum working current is 100mA.
If an external 24V power supply is used, please connect the external power supply +24v to pin 16 (COM),
and the external power supply 0V to pin 43 (e0v).
2. The user of do output power supply needs to provide it by himself. The recommended
working powersupply voltage is DC24V, and the conduction voltage drop of do port is about 2.4V.
Please pay attention to it in application.The maximum allowable voltage of do port is DC30V
and the maximum allowable current is 50mA.
