0.75KW-1Kw Single Phase 200V-240V AC Servo Motor Drive
Product Function Introduction
Built in motion control function,
Support I/O control and standard Modbus RTU protocol
In some cases, it supports the replacement of PLC or pulse module.
● Can be connected with HMI
● Rs485 motion control
● Controlled by I/O module of PLC
Parameter:
Wiring diagram of position control mode
1. The internal +24v power supply voltage range is 20v~28v, and the maximum working current is 100mA.
If an external 24V power supply is used, please connect the external power supply +24v to pin 16 (COM),
and the external power supply 0V to pin 43 (e0v).
2. The user of do output power supply needs to provide it by himself. The recommended
working powersupply voltage is DC24V, and the conduction voltage drop of do port is about 2.4V.
Please pay attention to it in application.The maximum allowable voltage of do port is DC30V
and the maximum allowable current is 50mA.
