Shenzhen Coolmay Technology Co., Ltd.
Keep innovation. Move Forward.
Add to Cart
Industrial Control PLC Ethernet COM Port Transistor Output High-Speed Counter
L02 series CPU module is a high-end application controller. L02 series CPU has built-in up to 8 axis (pulse type) positioning outputs,up to 6 groups of high-speed counter inputs, and diverse network communication options, providing users with powerful network functions. By setting program to establish various network device links. With the built-in memory card function of the L02 series CPU module, system settings can be quickly backed up or restored.
Advantages:
1) Larger program capacity and data memory block
◆L02 series CPU module, the program capacity can reach 32k steps. Built-in 8K registers (128 points for usual, 7872 points for power failure retention), and 24k file registers (support power failure retention).
2) Multifunctional communication interface
◆L02 series host PLC has two default programming ports, 1 Type-C programming port, the download speed is faster; 1 RS232, which the interface terminal is an 8-hole mouse head female socket.
Note: When using FX3U mode, the download program only supports RS232 download.
◆Provide 2 RS485, support Mitsubishi programming port protocol/modbus RTU protocol/free port protocol/Mitsubishi BD board protocol, easily realize PLC interconnection and communication with external equipment such as HMI and vfd inverters .
◆1 CAN, support CAN2.0A, CAN2.0B, modbus networking and free port protocol, can easily realize multi-channel interconnection.
◆1 high-speed Ethernet interface, supporting Mitsubishi programming port protocol, modbus TCP/UDP protocol, Ethernet/IP protocol.
3) Memory card storage interface
◆The memory card interface provides the following functions:
System backup: user programs, CPU parameters, I/O configuration settings, device settings
System response: user program, CPU parameters, I/O configuration settings, device settings
Parameter storage: device content value
Record storage: system error record, system status record
Parameter:
| Model | LO2M32T | |
| Programming language | Ladder diagram(LD) / lnstruction list / Sequential function chart(SFC) | |
| Program capacity | 32k steps | |
| Storage capacity | Date (D) | [D0~D127] 128points General / [D128~D7999] 7872points Retentive / [D8000~D8511]512points Special |
| Expansion(R) | [R0~R22999] 23000points Support power-down retention / [R23000~R23999] 1000points Internal use | |
| Expansion model | Max limit of 31 units: max 12 analog input/output respectively | |
| Max l/O | FX3U mode: 512 points; FX3G mode: 256 points (the sum of input and output points) | |
| CPU Digital I/O | 16DI / 16DO | |
| CPU analog I/O | NA | |
| Timer T | [TO~T199] 200points 100ms General / [ [T250~T255] 6points 100ms Retentive | |
| ※The 10ms timer is affected by the scan period. | ||
| 16-bit counter C | [CO~C15] 16points General | |
| 32-bit counter C | [C200~C219] 20points General | |
| [C235~C245 Single phase single counting][C246~C250 single phase double counting] | ||
| [C251~C255 Two-phase double counting] | ||
| High-speed pulse | 4-axis 200KHz+4-axis 50KHz (Y0-Y3 each 200KHz; Y4-Y7 each 50KHz, total should not be over 200KHz) | |
| High-speed counter | 6 channels 60KHz | |
| Do type | Transistor output, load maximum 500mA, low level NPN, COM connected to negative | |
| Default COM | Type-C, RS-232, RS-485*2, Ethernet, CAN | |
| Protocol | Programming port Modbus RTU, Modbus TCP, Modbus UDP, freeport protocol, CAN, Ethernet/IP, BD board | |
| Data backup function No | Program | Flash ROM |
| Retentive area | MRAM has no write limit | |
| Calendar(RTC) | Commercially available batteries CR1620(optional) | |
| Self-diagnosis | CPU abnormalities, internal memory problems, etc | |
| Rated input voltage | 24VDC(土10%) | |
| Software | Compatible with GX WORKS 2 | |
Size:
