Shenzhen Coolmay Technology Co., Ltd.
Keep innovation. Move Forward.
Add to Cart
L02 Series Industrial IoT Module Programmable Logic Sermo Motor Controller
Simple operation, Flexible, Cost-effective
Coolmay L02 series PLC is a high-function general-purpose controller specially designed for automation equipment.
L02 series modules can be expanded up to 31 units.
Powerful positioning control function, can support up to 8 axis high-speed pulse control at the same time, suitable for various automation equipment, such as electronic manufacturing, labeling, foodpackaging, textile equipment and other industry equipment.
The L02 series host has a built-in communication network and communicates with the Ethernet/IPindustrial network to realize high-speed data transmission.
Dial switch to set up IP, quickly build a network environment, built-in multiple sets of industry-specificfunctional modules, convenient for customer applications, and can set multiple password protectionto improve system security.
The snap-in buckle design allows the module to be replaced "straight up/down" for easy installation.
The appearance is simple and neat, the dark gray case is anti-fouling and anti-dirty, suitable for harshindustrial environments, and has the characteristics of recyclability, low pollution, and lead-free.Itcomplies with international environmental protection regulations and the concept of resource reuse.
| Model | LO2M24R | |
| Programming language | Ladder diagram(LD) / lnstruction list / Sequential function chart(SFC) | |
| Program capacity | 32k steps | |
| Storage capacity | Date (D) | [D0~D127] 128points General / [D128~D7999] 7872points Retentive / [D8000~D8511]512points Special |
| Expansion(R) | [R0~R22999] 23000points Support power-down retention / [R23000~R23999] 1000points Internal use | |
| Expansion model | Max limit of 31 units: max 12 analog input/output respectively | |
| Max l/O | FX3U mode: 512 points; FX3G mode: 256 points (the sum of input and output points) | |
| CPU Digital I/O | 12DI/ 12DO | |
| CPU analog I/O | 4AI/4AO | |
| AI Type | 2*0-10V, 2*0-20mA(4-20mA) | |
| AO Type | 2*0-10V, 2*0-20mA(4-20mA) | |
| Timer T | [TO~T199] 200points 100ms General / [ [T250~T255] 6points 100ms Retentive [T246~T249] 4points 1ms cumulative Retentive / [T256~T319] 64points 1ms General [T200~T245] 46points 10ms General | |
| ※The 10ms timer is affected by the scan period. lf the scan period is 12ms,the timer becomes 12ms and executes once. | ||
| 16-bit counter C | [CO~C15] 16points General | |
| 32-bit counter C | [C220~C234] 15points Retentive | |
| [C235~C245 Single phase single counting][C246~C250 single phase double counting] | ||
| [C251~C255 Two-phase double counting] | ||
| High-speed pulse | 4-axis 200KHz+4-axis 50KHz (Y0-Y3 each 200KHz; Y4-Y7 each 50KHz, total should not be over 200KHz) | |
| High-speed counter | Single phase 6 channels 60KHz, or AB(Z) phase 2 channels 60KHz+AB phase 1 channel 10KHz | |
| Do type | LO2M32T/LO2M24T: Transistor output, load maximum 500mA, low level NPN, COM connected to negative | |
| LO2M32R/LO2M24R: Relay output, load maximum 2A, dry contact, COM can be connected to positive ornegative | ||
| Default COM | Type-C, RS-232, RS-485*2, Ethernet, CAN | |
| Protocol | Programming port Modbus RTU, Modbus TCP, Modbus UDP, freeport protocol, CAN, Ethernet/IP, BD board | |
| Data backup function No battery storage | Program | Flash ROM |
| Retentive area | MRAM has no write limit | |
| Calendar(RTC) | Commercially available batteries CR1620(optional) | |
| Self-diagnosis | CPU abnormalities, internal memory problems, etc | |
| Rated input voltage | 24VDC(土10%) | |
| Software | Compatible with GX WORKS 2 | |
| Detailed info. refer to Coolmay L02 Series PLC Progarmming Manual L02 Series PLC Controller User Manual | ||
